What are the characteristics of the conductive foam?

conductive foam characteristics 1. No looseness of conductive fiber, no sharp edge. 2. Use 3 May be used as a grounding. 4 low surface contact resistance. Conductive permanent adhesive is 5. Not reduce the shielding performance of 6 after the 10000 friction. Thin section is suitable for the bottom I/O and D - Subminiature lining 7. High flexibility and good consistency - PET from type membrane

low conductive foam performance parameters are widely used in electronic chassis, chassis, chassis, industrial equipment, notebook computers, mobile communication equipment shielding, low cross section is 0. 25 'x0。 375 68 ~ 88 db [' 20 mhz ~ 10 ghz) Low permanent form variables: 8 ~ 20 low surface resistance < 0. 07ohm/in2 ≤0. 05 Ω / / low flame retardancy: UL certification, low working temperature: - 40 ℃ ~ 150 ℃ low conductive foam especially suitable for the closure pressure and limited capacity, low cost. In good joint resistance of high performance shielding required special

is suitable for use. - - PET from type membrane manufacturers low corrosion resistance, and aluminum, galvanized iron, galvanized iron plate, and other materials compatible with electrochemical technology parameters: material: PU foam, polyurethane foam, conductive cloth, copper nickel metal cloth shielding effectiveness: 20 MHZ to 10 GHZ shielding effectiveness of 100 db ( MIL- G - 83528). Surface resistivity: 0 or less. 08年Ω/ m² - - - - - - - - - - - - PET supplies from type membrane

related searches: PET protective film | | PET protective film producers to import PET protective film